Feature

●【Dimmable Bright Light】Makeup mirror lights is equipped with a dimmer switch to control the light, you can adjust the brightness or reduce the brightness according to your actual needs, and you can also turn the lights on or off.
●【LED Lamp Bead Source】Light string source is soft and not dazzling, no harm to your eyes after long time use. Professional controller, 5 color temperature adjustment modes, adjustable in 3200K‑6500K.
●【USB Ports】Light bulbs can be connected via USB in a variety of ways, such as laptop, power bank, plug, etc. Standard USB power supply, safe and universal.
●【Applications】LED mirror lights perfect for home, dressing room, makeup mirror, bathroom, wardrobe, etc. Beautiful wire makes it a great decoration for home, beautiful and stylish.
●【Instant Installing】Securely attach on a mirror, mirror frame or wall with the supplied double-sided tapes in a few minutes, and plug and play with the included power supply.


Description

Specification:

Condition: 100% Brand New
Item Type: LED Vanity Mirror Lights
Material: ABS
Brightness Level: 5 Gear
Product Color Temperature: 3200-6500 K
Power Supply Mode: USB Plug-In

Installation Steps:
1. Surface treatment should be carried out after the makeup mirror is installed: the surface should be dry, clean, free of rust, oxidation, oil, dust and other pollutants.
2. According to the number of lights designed. The distance between each lamp is 12cm.
3. Use the double-sided tape to install the makeup mirror light in the correct position, and press down to make the double-sided tape stick better and make the tape fully contact the bonding surface.
Reminder: After sticking the lamp, it must be pressed for about 30 seconds, and the best heat preservation intensities can be reached within 24 hours.

Package List:

1 x Light Bar

3 x Adhesive Tape

1 x Manual

Note:

1. It is recommended to use 2A or above USB power adapter, mobile phone charger and other standard USB mobile power supplies.2. This product is fixed with double‑sided tape, and the bonding surface for installation must be clean, dry and slick, without rust spots and bumps.3. If the number of bulbs is too large, the excess part can be cut off without power. Reminder: After the bulb is pasted, you must press the product for about 30 seconds, and the best adhesion can be achieved after 24 hours.