[Red]
[Silver]
Description
The fletching jig can be adjusted for 3,4 fletches for recurve or compound bow set up.
Instruction book
1、Fletching jig can also be screwed on the desk with two screws.
2、According to requirement, set to 4 or 3 Flether by the two screws, which are attached to the fletching device. To set the jig 3 Fletch,you need to screw out 4 Fletch screw and screw in 3 Fletch screw; to set the jig 4 Fletch,you can screw out 3 Fletch screw and screw in 4 Fletch screw
3、Fit the arrow shaft into the jig,making sure that its fully seated on the nock receiver.
4、Take a Flether and hold the Flether with the clamp.
After greasing the Flether with glue, hold the clamp on the magnet.
You can simply adjust the bracket of the clamp laterally and so stick the Flethers exactly on the center of the shaft.
Make sure there is no air between the Flether and shaft and the Flether is perpendicular to the shaft.
After the drying process, the clamp can be removed.
5、According to requirement , turn the handle by 120 or 90 degrees
Technical details:
Color:Red,Silver
Packag Weight: 800g
Included:
1 x Fletching jig
2 x Hex Spanner
2 x Screws