[white&stainless steel]
[black&stainless steel]
[black&nickel]
-Suitable for all vehicles, boats and off-road vehicles
-The signal comes directly from the satellite signal receiver(GPS Speed Sensor)
-The gauge has the advantages of high precision, quick location confirmation and short start up time.
-IP67 waterproof and dustproof grade
-Stepper motors used for full range of stepping gauges, great feature with its less power consumption, longer life, higher precision, etc.
-With curved glass (with anti-fogging function)
-With ultra-wide working voltage design( long-term operating voltage: 9-32V, Maximum up to: 36V (≤ 1 min)).
|
|
|
---|---|---|
How to connect wires ?Red wire --- Power Positive; Blue wire --- Power negative; Please note: Speedometer can be connected to 12VDC and 24VDC power directly. |
How to install it ?- Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. - Put the gauge in the hole. - Using M4 nut and C type bracket to seal up the gauge. - For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable. |
GPS Speedometer keeps counting ?- After installation in the first time, GPS speedometer needs to search for signal, thats the reason that LCD counts numbers all the time. - After getting signal, LCD will come back to 0. It is normal. |
- Turn on supply power after installation.
- Then the meter starts to search for signal and LCD will count automatically.
- If there is still no signal when LCD counts to 300. If there is still no signal, GPS speedometer will be flickering.
- If LCD shows E01, It means that there is not any GPS signal after starting working.
- If LCD shows E02, It means that GPS speedometer signal was lost during working.
- If LCD shows E03, It means that the device failed.
Fixing dimension | 85mm(3-3/8") |
Indicating Range | 0~999 (MPH, Knots, Km/h adjustable) |
Working Voltage | 12V/24V |
Operation mode | LCD display, stepper motor |
Protection grade | IP67 |
Other | waterproof and anti-fogging |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
999(MPH, Knots, KM/H adjustable) | 999(MPH, Knots, KM/H adjustable) | 999(MPH, Knots, KM/H adjustable) | 999(MPH, Knots, KM/H adjustable) | 999(MPH, Knots, KM/H adjustable) | 999(MPH, Knots, KM/H adjustable) | |
size | 85mm | 85mm | 52mm | 52mm | 85mm | 85mm |
color | white+stainless steel | black+stainless steel | black+black | black+stainless steel | black+stainless steel | white+stainless steel |
Indicating Range | 0-999(MPH, Knots, KM/H adjustable) | 0-999(MPH, Knots, KM/H adjustable) | 0-999(MPH, Knots, KM/H adjustable) | 0-999(MPH, Knots, KM/H adjustable) | 0-999(MPH, Knots, KM/H adjustable) | 0-999(MPH, Knots, KM/H adjustable) |
Type | gps speedometer | gps speedometer | gps speedometer | gps speedometer | gps speedometer | gps speedometer |
1x GPS speedometer
1x GPS Speed Sensor
1x Multi-plug socket
1x Installation Instruction