Feature

●Compatibility: Brand new high-quality Speedometer, suitable for most boats, yachts, motorcycles, cars, etc. Please confirm whether the product is compatible before placing an order.
●High-quality materials: made of high-quality 316 stainless steel, sturdy and durable, impact-resistant, not easy to damage, wear-resistant and scratch-resistant. Good weather resistance, sea water resistance, no rust, and long service life.
●Powerful functions: Speedometer uses a stepping motor to drive the pointer to accurately display the engine speed, and the LCD display clearly displays the mileage, with high indication accuracy, low power consumption and long life.
●Excellent performance: Speedometer is produced by a professional factory with fine workmanship and excellent performance. Using ultra-wide working voltage design, long-term working voltage is 9-32V, up to 36V (≤1 minute). Drive and control are relatively simple.
●Easy to install: Speedometer is easy to install, it has a buckle with the wiring harness connector, and the connection is firm, so that the meter can work normally even under strong vibration.


Description

Specification:
Item Type: Speedometer
Material: 316L Stainless Steel Bezel + Anti-Fog Glass
Installation Diameter: Approx. Φ85mm/3.3in
Indication Range: 0-200MPH, 0-300KM/H
Working voltage: 9-32VDC
Input Signal: GPS with Antenna
Working Current: ≤100mA
Working Temperature: -30℃ to + 75℃
Storage Temperature: -40℃ to + 85℃
Dustproof and Waterproof: IP67
Operation Mode: LCD display, stepping motor
Application: 12V/24V vehicles, boats, yachts, RVs and other vehicles
Backlight Color: Red
How to Use: Fix the meter on the dashboard and connect the power cord.
Installation:
1. Open a hole with a diameter of 85mm on the cabin panel and instrument panel, insert the instrument into the hole, the panel corresponding to the instrument panel is marked with a boss, and make a small notch at this position to ensure that it is on the back of the instrument At least 85mm instrument panel.
2. After installing the instrument into the panel, screw it down with a fixing ring (not included).
3. Connect the wires, and the instrument shell is directly connected to the 12/24v power supply.
4. Insert the wire harness and fix it firmly on the table.
Wiring Instruction:
The red wire to the positive
The blue wire to the negative
The orange wire to the backlight

Package List:
1 x GPS Speedometer
1 x GPS Speed Sensor
1 x Power Harness 
1 x Instruction Manual