CarPro HydroFoam is a pH Neutral surfactant designed to gently lift and remove dirt from solid surfaces in both a safe and effective manner. HydroFoam was designed with a special lifting lubricant that not only allows the dirt to be lifted from the surface but also provides a lubricant to safely wash the paint when used as directed.
In the tradition of our Hydro2 line HydroFoam was formulated with Hydrophilic glass fibers, fluoropolymers and can be applied to all solid vehicle surfaces! Paint, glass, plastic, wheels, calipers, and wheel wells are all easily within reach with HydroFoam.
How to use:
1. Do NOT apply HydrOfoam in the sun or to a hot surface! Applying in this manner may cause streaks that do not wipe off easily.
2. In shaded location or shop rinse the vehicle well. Surface must be well cleaned from soap residue and left wet with water.
3. Dilute 1:9.
4. Apply HydroFoam to car surface using Foam lance or by hand.
5. Immediately wash with mitt (preferred Carpro Merino Wash Mitt).
6. Rinse the entire vehicle very well.
7. Finish by "flood rinsing" the vehicle without a spray nozzle to push all the water off from top down.
8. Dry any remaining water by blowing off or with the use of a clean drying towel.
Available in 500ml and 1 Litre bottles.