Item Type: Car Immobilizer Transponder Bypass Module
Applicable Models: General Purpose Cars with Chip Keys
Material: ABS
Type: Remote Control Central Door Lock
Working Voltage: 12V
Working Temperature: -40~85 (℃)
Alarm Range: Approx. 2~5cm/0.8-2.0in
Alarm Method: Induction
Black line = negative
Red wire = positive
Main Steps:
1) Remove the key screws of bypass module control box, open the control box;
2) Insert the OEM car key or key PCB or Key chip under the wire;
3) Lock the locker and press the wires close to the remote key, or key PCB or Key chip;
4) Tighten the screws and lock the case;
5) Circles the sensing the wire on the OEM car key socket(circle more circles can enhance the signal;
6) Fasten the sensing wires to the car key socket with glue;
7) Try to start car engine to confirm the bypass module working, if it is not working, please try circle sensing wire more circles on the car key socket, or check the connection if it is right;
8) Place the bypass module in a hidden place.
Package List
1 x Host
1 x Connection Line
1 x Ring Connection Line
1 x Viscose
2 x Cable Tie
1 x Manual