NXA-AVB/ETHERNET Audio/Video Breakout Box with Composite, S-Video and Ethernet Pass Through Description: Audio/Video Breakout Box Part #: FG2254-10 OVERVIEW The NXA-AVB/ETHERNET Breakout Box facilitates the installation and distribution of video, data, and audio to Modero touch panels located up to 200 feet (60.96 m) from the AVB box. This unit accepts either Composite or S-Video from standard video devices. The NXA-AVB/ETHERNET also acts as a signal converter. It is designed to take normal wiring from the system and, in turn, translate the incoming audio/video data over Cat5 cable directly to the Modero Touch Panel. FEATURES Accepts either Composite or S-Video (video-capable panels only) Provides audio distribution to the non-video touch panels over a Cat5 cable (up to 200 ft.) Provides video/audio distribution to the video-capable touch panels over Cat5 cable up to 200 ft. (60.9m) SPECIFICATIONS DIMENSIONS (HWD) 1 1/2" x 5 1/2" x 4 7/8" (3.86 cm x 14.07 cm x 12.52 cm) Width when attached to mounting ears: 6.65" (16.86 cm) RU:1 POWER CONSUMPTION 50mA (with audio/video input) 23mA (with no audio/video) Routed through AVB using a PSN power supply CERTIFICATIONS FCC Part 15 Class B CE EN 60950 FRONT COMPONENTS 2-pin 3.5 mm Phoenix connector for power to the touch panel Green LED provides an indication of power status RJ-45 connector provides Ethernet signals to the touch panel RJ-45 connector provides differential audio and video signals to the touch panel (panel type dependant) REAR COMPONENTS 6-pin 3.5 mm Phoenix connector for in-bound (left/right channel) audio 4-pin 3.5 mm Phoenix connector for out-bound (from microphone) audio BNC connector (female) for Composite or Chroma (for video-capable panels only) BNC connector (female) for luminance (for video-capable panels only) RJ-45 connector for Ethernet input from the control system 2-pin 3.5 mm Phoenix connector for in-bound power