CONTACT CLEANER FG is a highly effective precision cleaning solvent blend which does not contain chlorinated solvents - alcohols or Glycol ethers. Contact Cleaner FG improves the performance and reliability of electricalelectronic equipment in the food industry by preventing contact failures or malfunctions by dissolving and rinsing away contaminants which may hold moisture and cause corrosion or arcing. FEATURES NSF K2 registered (N 139627) for use in the food industry Fast cleaning action Removes flux traces light oils and other contaminants Prolongs the life expectancy of components Non-conductive and non-corrosive Evaporates completely leaves no residue Safe for all metal surfaces most rubbers - plastics and coatings Fitted with 360 Spray System for all angle use - even upside down APPLICATIONS Ideal for quick and efficient cleaning of: PCBs Electrical Contacts and Switches Tape Heads Electrical and Electronic Assemblies Relays Transistors Condensers Precision Instruments Electric Motors Communications Equipment Safe to use on all plastic and rubber surfaces - the rapid evaporation of Contact Cleaner FG ensures that no residues are left on the treated equipment.N.B. Not for use on live equipment. TECHNICAL DATA NSF Registered - Category : K2 (N 139627) Appearance : Clear - Colourless Liquid Odour : Hydrocarbon solvent Specific Gravity (@ 20C) : 0.67 Pressure @ 25C : 3.0 Bar Flash Point : Not Applicable In Sealed AerosolDischarge rate : 1.1 gsec Solubility : Miscible With Most Organic Solvents Flammability : Classified as extremely flammable under current EC Regulations Packaging : 400ml Aerosol STORAGE The product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.