Feature
●[ Wire advantage ] The fourth-generation anti-interference low-resistance wire developed and designed is scratch-resistant and wear-resistant, and high-frequency supports PCIe 4.0 stable transmission.There is metal shielding, advanced EMI shielding conductive polymer, new materials for EMI shielding, flat cable design, to prevent the incidence or emission of electromagnetic frequencies, minimize interference and performance degradation.
●Support RTX3060 RTX3060Ti RTX3070 RTX3080 RTX3090 GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RX570, RX580, RX590, RX5700 XT, R6800 XT RX VEGA 56, RX VEGA 64 etc, support for all graphics cards produced after 2015.
●[ Line length advantage ] From 5cm to 100cm can be customized.The length of the wire refers to the part of the visible wire. It does not include the PCB and the connectors Length.
●[ High quality materials ] The product is made of high-quality materials and the PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The gold fingers have sufficient gold plating content and the gold plating feet have good electrical conductivity, which can reduce the blue screen of crash caused by increased oxidation and rust resistance.
●[ Very durable ] Use PCB gaskets with a thickness of 3mm to protect the metal welding points, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break the wire. The nail drop problem. The wire can be bent or folded without affecting the use.
[0.15m R23SH-TL]
[0.15m R23SF-TL]
[0.15m R23SL]
[0.25m R23SF]
[0.15m R23SH]
[0.15m R23SL-TL]
Description
Description:
Product name: PCIe 4.0 x16 to x4 extension cable
Product model: R23SF-4.0 180 Degree straight
R23SL-4.0 90 Degree right angle
R23SH-4.0 Universal type (connector buckle, PCB slotting)
R23SF-TL-4.0 Gold Finger/Male 90 Degree+Connector Female 180 Degree
R23SL-TL-4.0 Dual 90 Degree
R23SH-TL-4.0 Gold Finger/Connector 90 Degree (connector buckle, PCB slotting)
Transfer speed: PCIe 4.0 x4 full speed
100% ex-factory test
Application: PCIe x16 graphics video card to PCIe x4 slot extension cable
Suitable graphics card:RTX3090 RX6800xt, supports PCIe 4.0 graphics cards within the last four years
Note:
PCIe 4.0 has high requirements on the equipment. As long as the extension cable is connected, the signal will be attenuated. When the equipment is aging, the signal is poor or the environment is not good, please reduce the speed to use.
When the graphics card extension cable is connected, the performance is insufficient or the function is abnormal. There are three common problems:
1. The extension cable is assembled incorrectly. The graphics card extension cable should be installed in the graphics card slot closest to the CPU. Other slots have poor performance.
2. The golden fingers of the graphics card or the motherboard socket terminals are not in good contact or have oxides, causing the card to slow down, and the golden finger contact points should be clean.
3. The motherboard is aging, the graphics card is aging, and the equipment is more than 4 years old and does not support the use of extension cords. Please use at a lower speed if the equipment is aging or the signal is poor