You Will Get - 1X 360° rocking plate
- 2 X Hexagon Lag Bolts
- 2 X Expansion Bolts
- 1 X Daisy Chain (Extension Strap)
- 1 X Carabiner
- 1 X O-connector strap
- 1X Storage Bag
|
Accessories Dimensions and Instructions On Wooden Ceiling - Self-Tapping Screw Use On Wooden Ceiling
1.Draw the hole location on a steady wooden beam. 2.Dril 4 holes and make sure the dnill bit is smaller size than the screw. 3.Install the hanger, insert 4 self-tapping screw and tighten the screw with screw wrench. 4.Attached the preassem-bled swing set to the stainless steel swing plate by using the carabiner and adjust the height with daisy chain accordingly. TIPS:Please refer to the picture for the size details of the installation accessories tool
|
Installation Ways On Concrete Ceiling - Expansion Screws Use On Concrete Ceiling
1.Draw the hole location ,dell 4 holes with 6mm dnll bit. 2.Use 10mm drill bit to clear holes,inster the expansion screws. 3.Instal the ceiling hook,and tighten the screws with screwdriver. 4.Attached the preassem-bled swing set to the stainless steel swing plate by using the carabiner and adjust the height with daisy chain accordingly.
|
Installtion Scenarios of Indoor & Outdoor - Outerdoor Installation Guide ---On The Tree Or Bar
1.Connecting the daisy chain to the tree(or other steady support) 2.Tie the short rope to the swing fabric. 3.Attached the swing to daisy chain by using the carabiner,adjust the height accordingly.
|