Feature

●[High Speed Steel] These taps (M3, M4, M5, M6, M8 drill) are made of 6542 high speed steel and the surface is titanium coated to improve toughness and rust resistance.
●[Spiral Design] The spiral cone design can prevent damage due to wind resistance during the drilling process, allowing you to do all-in-one drilling without an assistant or drilling, and even center the tip, and the Chip cleaning during the drilling process will be better.
●[Scope of Application] 5 Steel drill bits, suitable for drilling holes in wood, plastic, fine copper, aluminum and other soft metals (5-6mm), not suitable for hard materials (such as steel plates).
●[Sanding Function] The screws are used to cut new threads or repair damaged threads, you will get a smooth touch experience.
●[Note] When drilling, water should be injected at the same time to cool the bit. This will help you increase the value of your practice. If the bit cannot be cooled down during the drilling process, the drilling speed should not be too high and drilling should not be frequent.


Description

Features:

These taps are made from high speed steel and surface is coated with titanium for high hardness and rust resistance.
There are total 5 pieces of taps in different sizes from M3 to M8 that you can use for tapping various threads.
Taps are designed with spiral flutes and the chip clearing process would be better.
They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them. These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair.

Specifications:

Material: High speed steel 6542

Surface Finishing: Titanium coating
Type: Spiral flutes

Standard: Metric

Size: M3*0.5mm, M4*0.7mm, M5*0.8mm, M6*1mm, M8*1.25mm

Quantity: 5

Package Includes:

5 x Taps