Repairing steps:
1. keep the repair place clean, and ensure the release of air; (if the hole is small, such as only 3 mm, then only three drops of glue, 4 hours after the dry and then a few drops, and then after 4 hours can be used normally. Remember, if the hole is small, do not use the patch, or the effect is not good)
2. cut the patch, the size is slightly larger than the broken mouth.
3. coated with glue around the broken place and patch, the patch will take a heavy object tightly pressed on the broken hole for about 30 minutes.
4. Do not inflate within 12 hours.
Attention.
1. remember not to inflate too full (especially in the summer), do not exercise on inflatable beds, or inflatable toys, otherwise the bed/toy will be overloaded and broken, causing the bed to bulge and can not be repaired.
2. do not contact the eyes or swallow.
Specification:
Name: Swimming Rings Repair Glue
Net Content: 3g
PVC Diameter: 6cm
Glue composition: acrylate glue
Glue staining degree: 5000 (Pa-s)
Use object: PVC inflatable products, such as swimming rings, swimming pools, inflatable boats, etc.
Packing List:
3g glue*1.
Round transparent repair patch*2
Note:
Please allow slight tolerances in size due to manual measurement, and lighting in photography may result in a difference in color than in real life.