Feature

●Draining of water or replacement of is determined by contamination level of .
●Inspect bowl daily and service as necessary.
●Application: Outboard engine for Mercury speedboats Motorboats, etc.
●Replace at least a year or when a decrease of is noticed.


Description

LIGUSTRUM To Drain Water:
1. Loosen -venting drain plug to drain water from bowl into a container.
2. Tighten drain.
3. Use primer bulb to fill filter with .
4. engine and check there are no leaks.
To Replace :
1. Loosen -venting drain plug and drain the into a container.
2. Remove filter from mounting with bowl connected.
3. Remove bowl from filter and clean o-ring gland on bowl. BOWL IS REUSABLE * DO NOT DISCARD.
4. Lubricate o-ring with oil or grease and install on bowl.
5. Install bowl onto new , tighten by hand.
6. Lubricate filter top seal with oil or grease.
7. Fill filter/bowl with clean and attach onto mounting , tighten by hand.
8. engine and check to there are no leaks.
: S3227
Category: Oil-water separator
Colour: color
Material: metal + nylon
Size: 10.4*11.4*27.9cm
Contents:
1 * Water Separator
2 * Screw (with apron)
Only the above content, other are not included.
Note: Light and different displays may the color of the item in the a little different from the real . The measurement allowed is +/- 1-3cm.