Feature
●HIGH QUALITY -- Wheel repair kit dilute the traces of the wheel surface and are resistant to both vibration and heat up.
●APPLICATION -- Designed to repair damages,scratches,slight dents and other damages to car wheel. Save your money and valued time.
●EASY TO USE -- Remove any rough edges orirregularities aroundthe damaged area using sandpaper.Mix putty and curing agent in proportion and fill the area that needs to be repaired.Clean the target area and smooth the repaired area with the scraper provided. (Drying time: about 15-20 minutes at 20℃.)
●Plextone is a manufacturer specializing in the production of car repair and maintenance tools. We produce a variety of professional repair tools, such as car headlight repair, car windshield repair, 7-second quick repair glue, fuel tank and water tank repair kit, car engine sealant, row Trachea repair glue, wheel repair tools. Our products are trusted by consumers all over the world.
[S212-N]
[S309]
Description
Item Description:
Plextone DIY alloy wheel repair kit is designed to permanently repair curb damages, slight dents, installation damages, sanding marks and other damages to alloy wheels, synthetic wheels, steel rims and so on, and many more on similar surface material. Kit fix scuffs and scratches in 30 minutes.
Packing list:
1 x Repair adhesive
1 x Alloy silver(vibration-resistant)
1 x Sandpaper (grit:1000)
1 x Sandpaper (grit:400)
1 x Cleaning cloth
2 x Gloves
2 x Alcohol prep pads
2 x Plastic spatula
1 x Blue soft absorbent wash cloth
Steps for usage
1. Preparation: clean the damaged alloy wheel and remove rough edges and unevennesses around the damaged area. 2. Identify the repair area. If damage is slightly, use wet sandpaper to accommodate the outlines to repaired surface, and Lacquer repair area. 3. If repair area big or with some holes. Then mixing the repair adhesive: press out the needed mass of repair adhesive to a mat. Mix both components to a consistent grey mass with spatula provided.(2-4min) 4. Repair: fill the mixed mass to overflow the damaged area. Allow dry for 15min. 5. Accommodation the outlines: use wet sandpaper to accommodate the outlines to repaired surface. If necessary, please repeat step 3 again. 6. Lacquering: clean the repair area and apply a thin layer of lacquer by brush. Lacquer should dry at least 1-2 hours before using the car and full cure time is 3 days.
