[A]

[B]

[C]

Features:
*Brand new and high quality
*Made of high quality materials, durable
*3.2 inches, 240 x 320 RGB LCD with resistive touchscreen.
*Four-way arrow keys, rotary scroll wheel and select button.
*Button battery for saving settings and date/time.
*Micro SD card slot for data and storage
*Some features demonstrated in the 2/22/16 firmware video:
*SSB, AM, Narrowband FM, Wideband FM audio reception with spectral waterfall.
*Wideband (18MHz) spectrum analysis and spectrogram.
*Monitoring of ships (AIS), vehicles (TPMS) and utility meter transponders (ITRON ERT).
* mode runs firmware for use with host software.
*PM calibration for more precise tuning.
*Sleep mode saves power by turning off only the display.

*work progress:
*Complete program verification prototype.
*Latest documentation as of May 2017, based on improvements.
*Capture and playback:
* of the best things about the PortaPack is that it makes it super easy to capture and replay wireless signals from your ISM band remote
*Create capture. Just enter the "Snapshot" menu, set the key frequency of the remote control, press the red "R" recording key, and press the key on the remote control.
*Then stop recording to save it to SD card.
*Now you can go to the playback menu, select the file you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your key fob.
*Microphone launch:
*Using the 3.5mm audio , the Portapack can also be used as a standard push-to-talk or voice-activated walkie-talkie. Plug the microphone into the audio can speak simply by holding down the right button.
*If desired, you can also enable multiple CTCSS tone options, and tones that appear to be transmitted to wireless headphones
*Other transmitters:
*There is a universal OOK transmitter that can be programmed with custom data. This mode can be used to experiment with things like simple key fobs or home automation switches.
*Multiple transfer modes implemented are problematic in most countries and can cause you huge trouble. These transmitters are purely for internal testing of the Faraday cage!
*Receiver:
*By connecting a speaker to the Portapacks 3.5mm audio , you can easily listen to standard NFM and WFM audio signals.
*ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightn symbol in the upper right corner. With the offset tee enabled, you can receive the plane.

Hardware Configuration:
*3.2 inch TFT240*320 screen
*Navigation switch
*Audio output
*Microphone input
*DC 2.1 interface
*4 layers of gold plating
*ROSH process (exported to Europe and America)
*Add the PortaPack to your Software Defined Radio and leave your laptop behind! The PortaPack connects to your  and adds a touchscreen LCD, navigation controls, headphone , real-time clock, micro SD card slot, just add a USB battery and youre ready to explore the radio spectrum anywhere. PortaPack firmware runs on the fast  processor in your  No computer is required (other than reprogramming the firmware).

Package content:
1 xReceiver (Upgraded PortaPackH2)
1 x 2.4/5/5.8GHzantenna
1 x 35DBi GSM/3G/4G Antenna
1 x 40MHz-6GHztelescopic antenna
1 x 40MHz-860GHzantenna
1 x 700MHz-2700MHz
1 x USB data cable
or
1 x Receiver
1 x 40MHz-6GHztelescopic antenna
1 x USB data cable
or
1 x Receiver


Notes:
1. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
2. Please allow a slight deviation between the data and the manual measurement.