Feature

●High quality: it has a lightweight aluminium alloy construction, they are precisely manufactured and very stable. Corrosion-resistant, black anodised for a long service life. Fits seamlessly into the camera bayonet and closes dust-proof.
●Compatibility: for Canon EOS Digital Rebel XTi (400D), XSi (450D), T1i (500D), T2i (550D), T3 (1100D), T3i (600D), T4i (650D), T5 (1200D), T5i (700D), T6i. (750D). ), T6s (760D), T7i, T6, SL1 (100D) and XS (1000D), 60D & 70D,77D,80D,10D,20D,30D,40D, 50D,5D,5D Mark II,5D Mark III, 5D Mark IV,5DS,5DS R, 6D, 6D. Mark II,7D,7D Mark II,1D,1D Mark II,1D Mark II N,1D Mark III,1D Mark IV,1Ds,1Ds Mark II,1Ds Mark III,1D X, 1DX Mark II 1D C etc.Camera Body & EF or EF-S mount lenses
●【Focus】 Extremely enlarged shots: with a retro adapter, extremely enlarged close-up shots can be realised on any DSLR. All at a fraction of the cost of traditional macro lenses. The adapter not only convinces with image performance, but fits as a lightweight in any bag and can therefore often replace a conventional macro lens.
●Unique design: top image quality: the reproduction performance of the lenses can easily compete with good macro lenses. This may be less surprised if you guide yourself in front of your eyes that the reverse position uses only the inner circle of the lenses. This has considerably fewer problems with blurring or light drop, as is for the edge areas of lenses in normal position, especially for the open.
●Note: the sharpness must be adjusted by hand on the lens. The same applies to the aperture if possible. There are two options: in M mode, you can set the exposure time yourself. This is usually done via a dial on the camera. In aperture automatic mode, the camera calculates the appropriate exposure time. All you have to do is press the shutter.


Description

49 mm retro adapter macro reverse ring adapter ring. For Canon EOS cameras T6s (760D), T7i, T6, SL1 (100D) and XS (1000D), 60D & 70D, 77D, 80D, 10D, 20D, 30D, 40D, 50D, 5D,5DMark II, 5. DMark III. 5D Mark IV,5DS,5DS R,6D,6DMark II,7D,7DMark II.

Accessories only. Camera and lens not included.

With this retro-adapter you can screw any lenses to the camera and turn them into macro lenses. This allows you to take fantastic macro shots without having to spend horrifying hum on expensive lenses.

Using the filter thread, the lens is screwed inverted to the camera. In this so-called retro position, the lens works similar to a magnifying glass. Since the focal length is significantly shorter than in the normal position, lower shooting media punches and higher image scales are possible.

The reverse ring is very delicate and yet very stable. Due to its low strength, there is only a very small distance between the lens and the camera, which does not sacrifice image quality.

Your camera lens thread size will be marked somewhere on the lens tube. This number is always predetermined by an "O" (diameter) symbol. For example: Ø49 = 49 mm lens thread. This number can be found on the back of your lens cap printed also often find.

Technical details:

Thread diameter: 49 mm.

Image scale 1:7 to 1:2.8.

Note:

Since the reverse ring does not transfer electronic data, you have to focus manually and adjust the aperture. Most cameras can calculate the exposure time by automatic time. However, with some it must be adjusted manually.

Package includes:

EOS to 49 mm macro reverse ring x 1.

Original manufacturer package