Feature
●Original febi bilstein – in OE matching quality
●Length: 17 mm, Material: steel , Outside Thread: M18 x 1,5 , Surface: galvanized , Weight: 0,01 kg
●i.a. suitable for: BMW: 1 (F20 LCI), X1 (E84), 3 (E46), 1 (F20), 5 (F11), 3 (E90), 3 (F31 LCI), 3 (F31), X3 (F25), 1 (E87 LCI)
●OE numbers (for comparison only): BMW: 24 11 7 552 349, VW: 01V 409 057
●Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!
Description
class="celwidget" data-feature-name="aplus" data-csa-c-type="widget" data-csa-c-content-id="aplus" data-csa-c-slot-id="aplus_feature_div" data-csa-c-asin="" data-csa-c-is-in-initial-active-row="false" data-csa-c-id="q34x9z-b58iwo-kn59iw-3w2omh" data-cel-widget="aplus_feature_div">
From the manufacturer
febi bilstein: Oil Drain Plug
mall part with a big effect: the oil drain plug is located at the lowest point of the oil pan and closes the drain opening through which the used oil completely drains off during regular oil changes. To ensure tightness after the oil change, the sealing ring should be replaced each time the oil is changed. If the sealing ring is firmly connected to the drain plug, the complete drain plug must be replaced.
febi offers a wide range of oil drain plugs with and without the matching sealing ring in OE matching quality. Selected sealing rings are also available individually.
febi – Your No.1 in the Independent Aftermarket
- Tested OE matching quality
- Manufacturing competence since 1844
- Your No. 1 for professional vehicle repairs
|
|
|
|
|
|---|---|---|---|
High-quality materials for absolute tightness |
Optimal fitting accuracy for easier repairs |
Strict quality standards |
Compliance with the requirements of vehicle manufacturers |
Quality by Conviction
All oil drain plugs supplied by febi are intensively tested by our quality management. The offered oil drain plugs are tested for various requirements and loads, e.g. fitting accuracy, dimensional accuracy, material quality, and tensile strength.
Precisely Fitting Production
Anyone who repairs their own car knows the problem: inexpensive replacement parts from the independent parts trade can deviate from the mould and can be difficult to install at the intended location.
febi makes all the difference: all replacement parts are manufactured precisely and it goes without saying that production tolerances are adhered to. This is the only way to ensure an optimal fit.