●* STRONG STABILITY - Dimmable LED transformer input voltage AC 200V-240V 50/60Hz, constant voltage output 12 Volt DC, 200 Watts Max. Good immunity to interference and smooth output. Built-in intelligent chipset with over-voltage, over-current, overload and short-circuit protection to ensure safety in using this power supply. ●* DIMMABLE DRIVER - TRIAC Dimming also known as forward phase-cut dimming and is the most common dimming method. Compatible with TRIAC dimmers and supports multi-units setup within the dimmer’s load capacity. It also supports 0-10V dimming, 1-10V dimming and PWM dimming. ●* SAFE COOLING - IP20 rated. Suitable for use in ventilated dry areas. The aluminium casing with honeycomb cooling holes facilitates heat dissipation and can extend the life of the power supply. It is a fanless unit. No transformer noise, no led flicker, no minimum load. ●* WIDELY USED - Widely used in LED optoelectronic products, such as power supply for strip lights, G4 lamps, floodlights, MR11/MR16/GU5.3 spotlights, billboards, advertising signage, CCTV camera and more. Not suitable for heating wires, halogen lamps, water pumps. Not compatible with constant current products. ●* WARRANTY SERVICE - To ensure stable dimming performance, it is recommended to keep the load at no more than 80% of its maximum capacity for better dimming effect. 2 Years Warranty. If you have any questions about our products, please do not hesitate to contact us.
[100w]
[200w]
[60w]
Description
Honeycomb heat dissipation hole design dimmable LED power supply
Universal Input: 200-240V AC 50/60Hz; Constant Voltage Output: 12V DC.
No minimum load, no led flicker, no transformer noise (no fan).
Complies with CE /ROHS/UKCA safety compliance certification.
Low Voltage Design Power Supply
IP20 Rating
Good Heat Dissipation, Cooling By Free Air Convection.
Protections: Short Circuit, Over Load, Over voltage, Over Temp.
TRIAC DIMMING & 0/1-10V DIMMING & PWM DIMMING
Dimmable LED transformer supporting a wide range of dimming options
TRIAC DIMMING - Also known as forward phase-cut dimming and is the most common dimming method. Compatible with TRIAC dimmers and supports multi-units setup within the dimmer’s load capacity.
0/1-10V DIMMING – Commonly used for commercial LED installations and is one of the simplest and earliest dimming methods. Control of the light is performed by a dedicated DC voltage signal that ranges from zero to ten volts.
12V DC 60W-200W; A high performance, robust and quiet power supply
Easy installation and wiring for a wide range of applications.
Coverts household AC current to DC for a smooth flicker free lighting solution.
Ideal as a driver for DC 12V LED lighting and other 12V low voltage LED electronic devices.
Not suitable for heating wires, halogen lamps, gas lamps, electric actuators, water pumps.