Feature(may vary by option.)

●✅【Item Size】76CM/2.5FT Sliding Fold Door Hardware Kit, (fits maximum single door leaf width: 36CM), Rail length 76CM, Rail width 4CM, Thickness: 6MM, Rotate roller x 2;
●✅ 【Strong load-bearing】 Sliding track is made of 100% carbon steel, rigid plate-like structure, load-bearing capacity is 2 times stronger than ordinary guide rails, the maximum door weight is 265 pounds, the surface is black painted to prevent corrosion;
●✅【Roller for various doors】Adjustable roller screws, suitable for 3CM-5CM thick door panels, The wheel made of nylon, there is no trace on the track during sliding to protect the track,and the side wheel bearings ensure smooth sliding;
●✅【Easy to install】Simple installation manual, step-by-step detailed instructions, accurate measurement, you can easily install it, it is widely used in closet, bedroom, kitchen, storage room, bathroom and other places, 24 hours customer service online to answer your questions;
●✅【After Sales】If the product has any quality problem during use, we will do our best to help you, step-by-step instruction and an experienced customer service team.

[76CM  & 2.5FT Kit]




[120CM  & 4FT Kit]





Description

Folding Barn Sliding Door HardwareFolding Barn Sliding Door Hardware
Folding Barn Sliding Door HardwareFolding Barn Sliding Door Hardware

Roller hanger size

  • The total length of the support is 13.5 cm, and the width is 4 cm, The width of the rotating piece installed on the door panel is 3CM.
  • The applicable thickness of the door panel is 3-5 cm, and the distance between the door panel and the wall is about 1~1.5 cm (the distance depends on the thickness of the door panel, the thicker the door panel, the smaller the distance)
  • Note: 15CM space shall be reserved above the door opening so that the installation roller hanger can be completed.

Sliding Door TrackSliding Door Track

sliding door tracksliding door track

sliding barn door hardware kitsliding barn door hardware kit

Floor axis and Anti falling device

  • Floor axis: Vertically mounted under fixed roller hanger,so that the door panel can vertical rotate,
  • Anti falling accessories: installed on the roller hanger to prevent the roller from falling off the rail.

Fixed and sliding hanger

  • Rotation: The lower end of the bracket can rotate 360 ° to make the door panel rotate smoothly.
  • Fixed hanger: fixed support is installed vertically above the ground axis, The bracket is fixed on the track through perforations, which is extremely stable and has no impact when opening and closing the door vigorously.
  • Sliding hanger: sliding accessories are installed at the sliding end. The bracket can slide and rotate to make the door panel open and close like a book.

Rail size selection

  • 2 Door panel width⩽Track length
  • For example, if you choose a 100CM track, the width of the two door panels needs less than or equal to 100CM.
  • In the best state, the width of the two door panels < the length of the track
Folding Barn Sliding Door HardwareFolding Barn Sliding Door Hardware

Product information