Feature●Simply replaces against the oil dipstick or oil filler screw●Display range from 20° to 140°C●Slow reaction viewing needle dampens liquids against shaky needles●Lens diameter: 28mm, outer diameter of case around the dial: 35.5mm (for 60120110150 43mm)●Item Dimensions: Thread Diameter x Thread Pitch x Thread Length x Shank Length x Outer Diameter on ThreadDescription
Hashiru Oil Temperature Gauge
Easily control your motorcycle engine oil temperature with this direct knife.
Details:
- The engine is only from an oil temperature of about 80 ° C, only then the engine oil reaches its full lubrication capacity.
- The chopsticks are made of rubber and vibration resistant.
- The display range of 20°C to 140°C warns you of engine damage caused by overheating and at the same time accurately tells you when your motorcycle is "heat risk".
- Replaces oil filler cover.
- Depending on the model, can also be used as a level gauge.
- Install in seconds, no cables, no installation mess.
- Slow reaction viewing needle dampens liquids against shaky needles.
- Attention: Before mounting the oil temperature gauge, please compare the thread diameter, thread slope as well as gauge length with the original oil filler screw.
- Also suitable for many models without adding to the DB Bike-DB. Measure and compare the thread of the original cover and the possible rod length.
Size (approx.):
Glass diameter: 28 mm.
Outer diameter of the case around the dial: 35.5 mm (for 60120110150 43 mm).
The remaining dimensions can be found in this order: thread diameter x thread pitch x thread length (the usable length is reduced by the sealing ring) x rod length from the end of the thread x outer diameter on the thread (if applicable) bottom/top if difference) in mm.
Certification:
Temperature indicators should not be permitted, so they do not require a test mark, notice or ABE.
Sold individually.