[blanc]

Suitable for all vehicles without LED rear lights. 4 sensor colours to choose from: black, white, light grey and dark grey. Operation: – When backwards, the screen shows the distance between the rear of the vehicle and the nearest obstacle from 2.5 m and the buzzer beeps more and more frequently when the obstacle gets closer. - When braking, the screen shows the distance between the front of the vehicle and the most obstacle from 0.8 m and the buzzer beeps more and more frequently when the obstacle gets closer. This operation lasts up to 10 seconds after stopping braking. Sound and visual information: - Screen: every 10 cm from 0 to 250 cm. - LCD: 4 crystals per sensor - Buzzer: For the rear, beeps from 30 to 250 cm and continuous beep 0 to 30 cm. - Buzzer: For the front, beeps from 30 to 80 cm and continuous beep from 0 to 30 cm. Technical features: - Buzzer can be switched on/off - Paintable sensors with a diameter of 22 mm. - Rear sensor cable length: 2.5 m. - Front Sensor Cable Length: 5.5m - Screen cable length: 5 m. - Input voltage: 9-15V - Operating temperature: -30 to 70 degrees Celsius. - Maximum power consumption: 2W. - Case dimensions: 96 x 70 x 27 mm. - Screen size: 73 x 54 x 23 mm. Package includes: 1 x control box, 1 x beam, 4 x long sensors, 4 x short sensors, 1 x screen, 1 x drill bit and 1 x double-sided adhesive. Installation: - Drill your bumpers using the included drill bit and insert the 4 sensors with long cables at the front and the 4 sensors short cables at the back. - Install the control box in the trunk and the screen on the dashboard. - Connect the sensors and display to the housing. - Connect the housing to the 12V, ground, reversing light and brake light.