Feature(may vary by option.)
●Protection rating: IP 65 || Body: Brass || I/O ports/Press: G1 / 2 "0.3-16bar || Input: AC-230V 50HZ || Type: Normally closed N/C
●The installation is easy to use. The arrow indicates the flow direction (please install horizontally!)
●Very good workmanship, 3 years warranty, CE, TüV; Fluids: Compressed air - neutral gases - neutral neutral fluid - other fluids on request.
●The body is made of brass with a stainless steel spring sleeve, the internal components are made of stainless steel
●Note: Only for clean medium without particles. The valve power is about 15W. In operation for a long time, the valve can heat up, which is normal, so it does not interfere with operation and has no negative influences.
[]
Description
Product information:
Pressure range: 0.3-16bar (diaphragm driver)
Electrical connection: 230 V/50 Hz.
ED 100%
Variant: normally closed "NC"
Thread: G1/2 inch internal thread.
Hole: 15 mm.
Protection rating: IP 65.
Sealing material: NBR
Temperature range: -10°C to +80°C
Fluids: compressed air - neutral gases - thin body neutral fluids -
other media on request
CPL with connector, gasket and screws
Very suitable for water, air, oils and similar fluids
body is brass with stainless steel spring sleeve
internal components are made of stainless steel
Information:
Servo Controlled Valves / Diaphragm Pilot
Solenoid valve (0.3-16bar) needs it to open or close
Pressure difference between valve inlet and outlet. The difference in pressure
is specified as the minimum pressure. If there is pressure equalization in the valve,
maybe because there is little or no fluid at the valve outlet
is consumed, the valve no longer works (it opens or closes
not reliable).
Box contents:
1 x Solenoid Valve