Feature

●▸: High torque clock with metal hook, I shaft, drive long hands of the clock (10mm to 450mm)
●: Installation method: Press the hour hand first, then install the minute hand and second hand.
●Hand length: total length of hour hands: approx. 73 mm (3.0 inches); Total length of minute hand: approx. 102 mm (4.1 inches); Total length of the second hand: approx. 123 mm (4.8 inches)
●Clock replacement kit: includes a movement with hook, 3 black clock hands, mounting hardware
●Area of use: suitable for repairing, replacing or making a clock; Applicable to cross stitch, three-dimensional embroidery, craft clock, frameless clock, etc


Description

1 x Quartz Clock with High Torque Movement Mechanism Replacement 1/4 Inch Maximum Thickness of Dial, 1/3 Inch Total Length of the Tree, Black


Case size: 56 x 56 x 16 mm (2.2 x 2.2 x 0.65 inches).
Pin diameter: 8 mm
Hour hand time: 73 mm
Minute length: 102 mm
Second hand length: 123 mm
Colour: black.
Powered by one AA battery (not included)
Thread length: 8 mm
For 6 mm thick dials
Accessories: gold seal, screw, hour hand, minute hand, second hand.
Installation method: press the hour hand first, then install the minute hand and second hand.


Notification:
1 Pointers are made of thin aluminum or iron plate after punching, although the packaging is good but still cannot avoid bending when transporting over long distances. Does not affect use.
2 Installing pointers is clever. Three needles should be installed separately and do not overlap as much as possible, otherwise the pointers may not walk. Please read the notes carefully before purchase.


Notice:
The installation of the pointer is very smart. The three needles should be installed separately and should not overlap as much as possible. This could affect the performance of those indicators that might not be able to work. Please read the instructions carefully before purchasing.