Glossy and transparent, UVGLASS resin is a liquid resin ready to use with a UV-LED lamp. This allows you to cure the UV-LED resin very quickly, in 1 minute! It does not require mixing and therefore no resin waste. It does not bubble or yellow. It is ideal to use with molds, glass, plastic, jewelry... Make an infinity of creations by adding dried flowers, gold leaf, color pigments or even glitter. Instructions: 1. Choose the mold (LCC19-M1, M2, M4 or M5), charm, jewel or other accessory to customize. Pour a layer of resin (1-3 mm depending on the desired thickness) and cure for 1 min under the lamp. 2. Customize the design with dried flowers, sequins or other decorations, then add resin before hardening again 1 min under the lamp. 3. Create the desired number of layers while hardening the creation under the lamp between each layer from 1 to 3 mm. If necessary, harden the creation under the lamp longer, until it is well dried and not sticky. Please note: when handling the resin may be hot! Precautions: Not suitable for children under 12 years old. Read the instructions carefully before use. It is recommended to work in a well-ventilated place and wear a mask, gloves and goggles. Avoid contact with eyes, skin and clothing. In case of contact, rinse immediately. Do not ingest. Protect your worktop to avoid damage. Keep out of reach of children. Cleaning tools: acetone or white spirit.
prohibited under 12 years