Feature(may vary by option.)

●This receiver with transmitter is ideal for replacing your faulty receiver or controlling other devices via a free key on your remote, turn on lights, motor, TV, garage, wireless alarm, wireless controller, etc.
●The receiver can store 99% of fixed code 433.92MHz radio transmitters. The contact of the two output relays is normally NA open.
●The operation of the receiver can be impulsive (monostable) or progressive (bistable: during the first command, the relay closes the contact, the second opens it, and so on). The remote control is recorded by self-learning with the buttons located on the side of the terminal block.
●The container supplied is for indoor use. You can also remove the circuit board to insert it into an existing waterproof box and connect an external antenna to the circuit terminal.
●To clear memory: press the receiver learn button 8 times. The codes are clean. Instructions for use will be provided.

[2 CH_AC 220V]

[2 CH_DC 12V]

Description

How to use:

Press the learn button once until the receiver light turns on and loosens, then press the button of the new remote to program. The indicator on the receiver flashes and turns off. The remote control is then ready to use.

Clear Memory:

Press the learning button 8 times continuously, the receiver light will flash and turn off, codes will be cleared.

3 working modes by adjusting the jumper:

1. Momentary: Press and hold a certain button on the remote control, the corresponding channel comes out "ON", release the button, pull out "OFF" - Jumper in the M position.

2. Lock: Press a specific button on the remote control, corresponding channel outputs "ON", other outputs "OFF", no jumper.

3. Switching: Press a specific button on the remote control. The corresponding channel transmits "ON". Press again and finish the "OFF" jumper in T position.