Feature●1. Charge the battery use and check whether the container wires are in contact with the wire mesh, is the key step of inspection;●2. Put grass powder. It is suggested that the length of the grass powder is more than 5mm, is more effective, and then tighten the lid.●4. Press the surface of the target platform with the electrical connector of the negative electrode, as close as possible, then use the grass seeder to start spraying the grass powder 2-3 cm from the target plate.●3. In the target model and on the ground, the blank is drawn and applied evenly, ready to start watering grass powder;●5. After the grass powder is finished, pour in the extra grass powder or use a miniature vacuum cleaner for the. Cut the haystack with small scissors and a toothpick until it grows evenly.Description
Material: plastic.
Color: Black
Contents:
1 x flocking machine (battery).
1 x Net
1 Pack x Grass
1 x brush.
1 x model tool.
Only the above package, products are not included.
Note: Due to lighting and different screen settings, the colour of the item may vary slightly from the actual product. The allowed measurement error is +/- 1-3 cm.