Model: Wp 10-140f
1x Pump
Hose Clamps and Accessories
Manual
Engine Type: Single-cylinder, Air-cooled,Four-stroke Gasoline Engine.
Engine Displacement: 38cc
Maximum Power and Speed: 1.2kw, 8500r/Min
Fuel Tank Volume: 650ml
Engine Oil Tank Volume: 80ml
Maximum Suction: 7m
Maximum Lift: 30m
Inlet & Outlet: 1” (25mm)
Flow Rate: 8000l/H
Product Size: 36*28*32cm/14.17*11.02*12.60in
|
|
|
---|---|---|
HIGH STRENGTH FRAMEThis petrol-engine water pump has a metal frame made of a high quality alloy for protection and stability, and further enhances its portability. |
USER-FRIENDLY DESIGNThe petrol-engine water pump has a recoil pull start and is equipped with an ergonomic pull-cord starter, making starting more convenient and simple. |
1 INCH INLET & OUTLETThe water inlet and outlet of this gasoline water pump is 1 inch BSP standard thread, which is very easy to assemble and easier to use. |
1. First Use: Choose Genuine Four-stroke Gasoline Engine Oil and Add It to the Engine Oil Tank, About 80ml. Replace It Every 100 Working Hours in the Future.
2. Fill the Fuel Tank and Engine Oil Tank with Gasoline and Engine Oil Respectively. Turn on the Oil Circuit Switch,
3. Open the Water Filling Cover Above the Water Pump. Fill up the Water Diversion, Use the Card Link to Connect the Water Inlet Pipe (Note That All Connections of the Water Inlet Pipe Cannot Leak. Air Leakage Will Cause the Water to Be Unable to Absorb).
4. Close the Damper and Pull the Starter. After Starting, Open the Throttle and Increase the Throttle to Start Working. (If There Are Signs of Starting but Failed to Start, Please Open the Damper and Continue to Pull the Starter)
Note: After Each Work, Run at Idle Speed for 2-3 Minutes, and Turn off the Engine After the Engine Temperature Drops to Increase the Service Life.
1. First Use: Choose Genuine Four-stroke Gasoline Engine Oil and Add It to the Engine Oil Tank, About 80ml. Replace It Every 100 Working Hours in the Future.
2. Fill the Fuel Tank and Engine Oil Tank with Gasoline and Engine Oil Respectively. Turn on the Oil Circuit Switch,
3. Open the Water Filling Cover Above the Water Pump. Fill up the Water Diversion, Use the Card Link to Connect the Water Inlet Pipe (Note That All Connections of the Water Inlet Pipe Cannot Leak. Air Leakage Will Cause the Water to Be Unable to Absorb).
4. Close the Damper and Pull the Starter. After Starting, Open the Throttle and Increase the Throttle to Start Working. (If There Are Signs of Starting but Failed to Start, Please Open the Damper and Continue to Pull the Starter)
Note: After Each Work, Run at Idle Speed for 2-3 Minutes, and Turn off the Engine After the Engine Temperature Drops to Increase the Service Life.
1. First Use: Choose Genuine Four-stroke Gasoline Engine Oil and Add It to the Engine Oil Tank, About 80ml. Replace It Every 100 Working Hours in the Future.
2. Fill the Fuel Tank and Engine Oil Tank with Gasoline and Engine Oil Respectively. Turn on the Oil Circuit Switch,
3. Open the Water Filling Cover Above the Water Pump. Fill up the Water Diversion, Use the Card Link to Connect the Water Inlet Pipe (Note That All Connections of the Water Inlet Pipe Cannot Leak. Air Leakage Will Cause the Water to Be Unable to Absorb).
4. Close the Damper and Pull the Starter. After Starting, Open the Throttle and Increase the Throttle to Start Working. (If There Are Signs of Starting but Failed to Start, Please Open the Damper and Continue to Pull the Starter)
Note: After Each Work, Run at Idle Speed for 2-3 Minutes, and Turn off the Engine After the Engine Temperature Drops to Increase the Service Life.