Feature

●Electric Scooter Charger: Input: 100-240VAC 50/60Hz 2A, output: 42V 2A, UK Plug, 3 pin connector, The dimensions at the interface are 9mm*10mm, It has the correct 3-pin center configuration for electric self-balancing scooter, two wheel smart drifting board etc. Please check whether your balance scooter conforms to our charger interface before ordering.
●Multiple Protections: Hoverboard Charger is lightweight, small, stable, highly efficient, safe etc. The built-in intelligent protection module can effectively prevent short circuit, over-current, overcharging and other problems and take care of your charging equipment.(Note: The charging time may take 6-8 hours, depending on the size of the battery capacity.)
●Charging Indicator: The Charger for Hoverboard has an LED charging indicator, the red light will light up when charging and the green light will light up when the battery is fully charged. You can accurately judge the charging status by color, which is very convenient to use and can avoid danger. (If the indicator light remains green, the first reason may be that your Hoverboard prolonged non-use or excessive discharge; the second reason may be it has problem, Please contact us in this case).
●Safe and Reliable Material: The hoverboard charger UK 3 pin is made of high quality material for good quality, strong and durable, not easy to damage and has a long service life. You can use it easily and freely to charge it. This scooter charger adapter is an ideal replacement for your old or damaged chargers. You donâ€t need to buy a new scooter again, so you can save money.
●Scope of Applications: The output voltage of this Scooter Charger Adapter is 42V, and the current is 2A, the efficient output can help you charge quickly. It compatible with Electric Scooter, Balance Scooter, Drifting Board. Please carefully check the size of your original charger and connector before ordering, if its the same with it, it can be replacement your original adapter well.


Description

Features:
- Play a Protective Role: Electric Scooter Battery Charger is with Overvoltage protection/Overload Protection/Short Circuit Protection, and quality fuses for protecting your smart board from burning.


- Hoverboard Charger UK 3 Pin: The power adapter has a 3 Pin balanced dedicated interface, which is compatible with 6.5, 8 and 10 inch smart scooters with 2 wheels. It has the correct center 3-pin configuration to fit various balance boards.


Specification:
Input Voltage: 100-240V 50 / 60HZ
Output Voltage: Constant Voltage 42V
Output Current: Constant Current 2A
Type of Connector: 3 Holes

3-hole interface outer diameter: 9mm
Line length: 1m
Item Weight: Approx 213g


Package include:
1 * Electric Scooter Charger(UK Plugs)


Notice:
1. To find out if this product is suitable for your Scooter？
1) Determine if it is a 36V lithium battery
2) Check if the required parameters are consistent (see the introduction of the detail page for details)
3) Check what interface the scooter has (ours is a three-hole interface, the diameter of the three-hole interface is 9 mm)
2. If the Hoverboard is too discharged and there is no remaining power, the LED may always show a green light.
3. As the product is designed to be light and portable, the charger is not as heavy as the original one, so if you mind, please place your order carefully.
4. The charger generates a certain amount of heat in the initial phase, but this gradually decreases in the later phase. Unplug it when it has been hot all the time