Feature

●Double: Dual input oscilloscope (single, 16Msps, 3MHz bandwidth). It also has dual channel voltmeter, frequency meter, remote controller PWM controller, frequency generator, I2C controller, pulse/edge counter and other functions.
●System Requirements: The virtual oscilloscope analyzer supports the operating system Win2000/XP/Vista/WIN7, Celeron 4 2.0G or Pentium 4 1.8G or higher processor. Requires USB2.0 high-speed interface, does not support USB2.0 full speed or USB1.1, you need to install Framework 3.5 SP1.
●Accessories: LHT00SU1 Virtual Oscilloscope Logic Analyzer I2C SPI CAN Uart - Arduino compatible SCM and DIY kit programmer and logic analyzer - 1 machine, 1 test clamp line (with 10 test clips), 1 USB.
●Standard parameter: Standard parameters: The maximum sampling frequency is 16MHz, the maximum analog bandwidth is 3MHz, and the input voltage range is -10V~+10V. The sensitivity is 78mV and the maximum vertical resolution is 256 levels.
●High performance: 8 digital channels + 1 analog channel logic analyzer, support for multiple protocol I2C controllers, pulse/edge counters, mixed signal oscilloscopes and logic analyzers.


Description

Specification:

Model: LHT00SU1

Size:10.4*5.5*3cm/4.1*2.2*1.2in
Weight: Approx.218g/7.7oz

Analog parameters:

Number of input channels: 2 channel
Sampling channel: 1 channel
The maximum sampling frequency: 16MHz
The maximum analog bandwidth: 3MHz
Input voltage range: -10V to + 10V
Sensitivity: 78mV
Maximum vertical resolution: 256 level
Digital parameters:
Number of channels: 8
Input voltage: 0V-5.3V
Input Low level: <0.8V
Input high level: >1.4V
Supported protocols: Serial Peripheral Interface, IIC, UART, SMBus, I2S, CAN, Parallel, Custom, Search, Async, 1-Wite, PS / 2
The communication interface parameters:
USB parameters: USB2.0 high-speed 480Mbps
System requirements:
Supported operating systems Win2000 / XP / Vista / WIN7 (32bit)
Celeron 4 2.0G or Pentium 4 1.8G higher processor
Need USB2.0 high speed interface, does not support full speed USB2.0 or USB1.1
Memory Requirements 128M or more
Need 2G or more hard disk
You need to install Framework 3.5 SP1

Note:

If your system is WINDOWS XP, please check whether your computer has ".NET 3.5 SP1" this component, if not, go to the website to download and install.

Package included:

1 x Machine
1 x Testing clamp cable

1 x USB connection cable

10 x test clip