Miniature Bearing Types & Features
Miniature and instrument ball bearings can be divided into two basic types, deep groove and angular contact. The first (deep groove) can also be classified as "Open", "Shielded", or "Sealed" depending on the existence and type of seal or shield. Deep groove ball bearings have two inherent advantages;
they can sustain some axial load in either direction as well as radial loads, and the two raceway cross-sections are simple circular arcs which can be very precisely finished so the bearings have low friction and very little noise or vibration. Several different cage designs are available with different characteristics and the choice depends upon the individual application.
Model Number: MR148ZZ
Torque Capacity: 8X14X4 mm
Surface Roughness: Ra 0.05
Structure: Ball bearing
Material: Chrome Steel/GCr15
Coatings: Chrome Steel/GCr15
Purposes of Lubrication
The main purpose of lubrication is to reduce friction and wear inside bearings that may cause premature failure.
The effects of lubrication can be briefly explained as follows:
(1) Reduction of friction and wear
Direct metallic contact between the bearing rings, rolling elements and cage is prevented by a lubricant film.
(2) Extension of fatigue life
The rolling fatigue life of bearings depends greatly upon the viscosity and film thickness between the rolling contact surfaces. Sufficient film thickness prolongs the fatigue life while film thickness shortens it.
(3) Dissipation of frictional heat and cooling
Circulating lubrication may be used to carry away frictional heat or heat transferred from outside the bearing.
(4) Others
Adequate lubrication also helps to prevent foreign matter from entering bearings and guards against corrosion and rust.