Feature

●4. Press the surface of the target platform with the electrical connector of the negative electrode, as close as possible, then use the grass seeder to start spraying the grass powder 2-3 cm from the target plate.
●3. In the target model and at , the white is drawn and applied evenly, ready to start sprinkling grass powder
●2. Put grass powder. It is suggested that the length of the grass powder is more than 5mm, is effective, and then tighten the lid.
●1. Charge the battery use and check whether the wires in the container are in contact with the wire mesh, is the key inspection step
●5. After the grass powder is finished, pour in the extra grass powder or use a miniature vacuum cleaner for the. Cut the haystack with small scissors and a toothpick until it grows evenly.


Description

Color: Black
Material: metal.

Contents:
1 x Flocking (2 x 1.5V batteries).
1 x diameter net cover.
1 x diameter net cover.
1 x Grass Bag
1 x brush.
1 x Template Tool

Only the above package, products are not included.
Note: Due to lighting and different screen settings, the colour of the item may vary slightly from the actual product. The allowed measurement error is +/- 1-3 cm.