Feature:
Surface preparation: Remove large rust and scale particles with a wire brush or sandpaper. Clean the surface thoroughly to remove dirt, dust, and grease.
Clean-up: Application equipment should be cleaned immediately with soap and water
General: Do not apply this product if the surface temperatures are below 50°F. Store in a cool, dry place, protected from freezing or temperatures above 100°F. For long-lasting protection of iron surfaces, the cured rust converter coating should be sealed with two coats of high-quality oil-based paint. No other primer is required.
Specification:
Purpose: Extereme Rust Converter
Material: Water-based primer
Capacity: 100ml
Commodity effects: rust removal, decontamination, polishing, protection of chrome-plated metal parts
How to use:
Shake or stir well before using. Apply two coats using either a brush, roller or pump sprayer allowing at least 20 minutes drying time between coats. Allow 48 hours of cure time before applying a quality paint.
Package Includes:
2x Extreme Rust Converter (100ml)
2x Brush
Note:
1.Actual color may be slightly different from the image due to different monitor and light effect.
2. Due to manual measurements, please allow slight measurement deviations. Thanks!