Features:
KQ-130F is a single row 9-pin small size high-performance carrier data transceiver module.
Designed for on 220V AC, strong interference, strong attenuation and long distance required environment, reliable data transmission.
A frame continuous send maximum length is 252 bytes or less, from 1 to 252 defined by the user, and the module will not send redundant data.
TVS diode protection against stroke, the PCB wiring and components selection are all designed for wide temperature and high voltage resistance.
Suitable for meter reading, street light, intelligent household, fire fighting, building control and other applications that need power to send data.
Specifications:
Working Frequency: 120~135KHZ
Connector Baud Rate: 9600bps
Actual Baud Rate: 100bps
One Frame Continuous Send Max. Length: ≤252 bytes (user defines from 1 to 252, module will not send redundant data)
Receive Sensitivity: ≤1mV
Out-of-band Rejection Ability: ≥60dB
Band Width: ≤10 KHZ
Insulation Resistance: 500V≥500MΩ
Power Supply: DC +5V(receiving: ≤11mA; sending: ≤230mA)
Frequency Insulation Withstand Voltage: AC to GND 3000V (1min test no breakdown, nor current leak)
Operating Temperature: -25℃~70℃
Operating Humidity: ≤90%
Size: 5.3*4.5*1cm/2.08*1.77*0.39in
Weight: 30g(approx.)
Wiring:
1P---AC: 220V live wire (or neutral wire)
2P---AC: 220V neutral wire (or live wire)
3P---+5V: +5V sending power supply(210mA), if only receiving data, can be disconnected to reducing power consumption
4P---GND: Digital circuit ground
5P---+5V: +5V working power supply 11mA
6P---RX: TTL level, carrier data input, connect to TXD of SCM
7P---TX: TTL level, carrier data outpu