Feature

●Dual bay docking station allows an easy accessing with two 2.5 inch & 3.5 inch SATA I/II/III hard drives and UASP at the same time
●Super speed USB3.0 interfaces with data transfer rates up to 5Gbps; 10 times faster than USB2.0, backward compatible with USB2.0 and 1.1
●Standalone duplicating/ offline clone operation with LED indicator offers 1: 1 copies of hard disks at a rate of up to 300MB/s
●Tool-free Installation on Windows Vista/ 7/ 8/ 10, Mac OS X 10.3 to 10.10, support hot-swapping and easy set up
●Ce & RoHS certified with 18 months replacement warranty, 45 days money return guarantee and 7 x 24 hours email service


Description

  • Wavlink is the perfect solution for managing your 2.5 or 3.5 HDD & SSD with sata interface without any tools or special software. After connecting it to your computer or laptop, you can do many things such as formatting, file transfer, data recovery or drive imaging at Super Speed USB 3.0 data transfer rates. Also has a super speed connector that can speed up to 6GB/s with UASP protocol.
  • Equipped with 36W power adapter, it can easily meet the 2×10TB power supply demand. LED indicators show, at a glance, the status of the duplication process, including the HDD status and clone progress.

 HDD/SSD Storage Docking Station ST334UA HDD/SSD Storage Docking Station ST334UA

WAVLINK Dual Bay HDD/SSD Storage Docking Station ST334U, allows you to install and access SATA drives quickly, it is a perfect solution for data recovery, drive imaging, and testing centers, or any environment requiring fast access to uninstalled/archived drives.

OFFLINE CLONEOFFLINE CLONE

Specification:

LED: Power*1 HDD*2 Clone*4 (25% 50% 75% 100%), Chipset: JMS561U

In the box:

1 x Dual Bay SATA HDD Docking Station, 1 x 12V 3A Power Adapter, 1 x USB 3.0 Cable, 1 x Users Manual, 1 x Card​

How to Operate Offline Clone Function:

  1. Please unplug the DC power adapter to make sure that the power is off before starting.
  2. Insert Source Disk into hard drive bay A, then insert Target Disk into hard drive bay B.
  3. Make sure the USB cable is disconnected from computer.
  4. Connect the power adapter and turn the"ON-OFF" switch on.
  5. Hold the CLONE button for about 3 seconds, when all leds turn on, the clone progress will start.
  6. Four lights (25%, 50%, 75%, 100% ) will turn solid blue when the cloning process is completed.
  7. Finally turn the "ON-OFF" switch off, disconnect the power adapter and eject your drives.

Tips for Offline Clone:

  • The capacity of target disk must be larger than the source disk.
  • Please confirm that your source drive and target drive can both work properly.
  • Please connect the 12V power adapter to ensure a stable power supply for transmission.
  • To avoid data transfer errors, overheating and damage to the device, please make sure that there are no faulty driver cells.
  • To avoid data loss, do not remove or insert drives when one drive is working in the docking station. Please power off the dock before removing.
  • Please confirm the target drive have no data. If you have existing data on the target drive, the cloning process will eliminate your target drives data. Because the target drive will be cloned to be the same as the source drive, partition, format and data are the same too.


From the brand