Feature(may vary by option.)
●The HiFi DAC Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits.
●Absolutely perfect to support all Raspberry Pi music playback system, like LibreElec, OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.
●Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film capacitor.
●On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals.
●Comes with software, document and friendly technology support. For more information, please refer to our wiki（view the link on color page comes with the goods).
[DAC Hat]
Description
InnoMaker HiFi DAC Audio Hat for Raspberry Pi
- The Innomaker HiFi DAC Hat maybe the best optimized partner for Raspberry Pi audio output.
- Used on-board PCM5122 as the IIS clock master, instead of the clocks from RPI which comes with too much jitter.
- Added dual low jitter oscillators(45.158M and 49.152M) to support more exact sample rate clocks.
- No soldering, no additional cables. Just plug it in and do some simple configuration,
- You would get a high-class music player which is low-cost.
|
|
|
|
|---|---|---|
TI PCM5122 ChipsetAudiophile Texas Instruments 32bit/384KHz DAC PCM5122
|
TPA6130A2 AmplifierStero Directpath Headpfone Amplifier TPA6130A2
|
40-Pin ConnectorCompatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+, A+, A with the 40-pin connector. |
|
|
|
|
|
|---|---|---|---|
RCA OutputGold Plated RCA output connector |
3.5mm Audio JackHigh-quality 3.5mm stereo audio jack. With 138mw headphone Amplifier can directly drive headphone. |
High Precision Oscillators45.1584M and 49.152M two hight precision oscillators |
WIMA CapacitanceGerman WIMA professional-level film capacitance |
Note:
- In “Output” setting page, must seleted Output Device/DAC Model: Allo BOSS.
- We use two low jitter oscillators (45.158M and 49.152M) on-board to support more exact sample rate. Its way better than many other DAC module. If you make wrong driver setting, the dac module may play abnormal (for example: playback at double speed via HiFi-Berry driver).
[ Key Features: ]
- Dedicated 384kHz/32bit high-quality DAC PCM5122 for best sound quality.
- Audio output connectors: 2x RCA (LEFT &Right) &3.5mm head phone Jack.
- With 138mw headphone Amplifier can directly drive headphone.
- Work status indicators facilitate the understanding of the system working status.
- DAC SNR is 112Db.
- DAC THD+N @ -1 dBFS -78dB.
- Full Scale Output of DAC is 2.1Vrms.
- Dynamic Range of DAC is 112dB.
- Sampling Frequency ranges from 8kHz to 384kHz.
- Ultra-low noise voltage regulators for optimal audio performance.
- Integrated EEPROM for automatic configuration(Option).
- Automatically switching frequencies according to the input I2S signals.
- Dual low jitter crystal oscillators for Master Clock generation.
- Infrared remote control connector (using GPIO26).
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Raspberry Pi HiFi Amplifier | USB to CAN Converter | OV9281 Camera for RPI | Raspberry Pi PoE | OV5647 Camera for RPI | RS485 CAN for Raspberry Pi | |
|
|
|
|
||||
| Customer Reviews |
159
|
68
|
9
|
21
|
197
|
2
|
| Price | £26.99 | £28.99 | — | — | — | £33.00 |