Installation:
Please affix tapes on both sides of the window film to separate.
1. Thoroughly clean the window and squeegee the glass clean. Make sure the surface is without any oil, dust, or stain.
2. Cut your film to size of the window adding an extra 2cm to the width and height.
3. Peel Off the backing film along a short side
4. Spray enough soap water on the smooth film and window, apply the smooth side of the film onto the glass and slide into position
5. Use a squeegee , push out all the water and bubbles from behind the film.
6. Trim off any excess film using the knife..