In order to ensure better use of the product, please read this operational procedures:
1.Put the documents in the cover, align right and left, up and down, knock on a hard surface to align all the sheets specially at she spine.
2.Turn on the power. The warming up indicator and the time selection (Ⅰ)light are lit.
3.Warming up starts
4.Warming up completes when the light turns on and a buzzing sound is heard.
5.Based on the thickness of the document to be bound, select binding time. Time selections: Selection I.(60 seconds) is suitable for standard covers less than 20mm thick. Selection II(120seconds) is suitable for standard covers over 20mm thick. Selection III (180 seconds) is suitable for accounting vouchers and SteelVIP covers. Default selection is I if no choice is made.
6.Insert the documents in the groove in full contact with the heating board. When a buzzing sound is heard, hand press the front board tight against the document. Heating starts.
7.When the lights turns on and a buzzing sound is heard, take the documents out. Insert it into the cooling groove for 3 minutes to let it cool down. Perfect and beautiful document binding is completed.
Safety Precaution System:
This machine is equipped with an automatic switch off system for the heating board. When the documents are left on the heating groove or you are away for a consecutive 10 minutes after binding is completed, the CPU system will automatically switch off the power for the heating board till the documents are taken out and the systems resets to automatic heating.3minutes later, binding can start for another book, If you turn on the switch to preheat the machine and leave the text unbound, the power will be cut off automatically after 12 minutes of standby.
Caution:
1.The heating groove should be kept clean, free of any other objects.
2.To ensure your safety, please do not touch the heating board with your hand when the machine is at work.