Feature

●The replacement part number (OE number): 0280156061, 06A906031BA, 852-12184, FJ889.
●Fitment: for VW Beetle 1.8L 2001-2005, for VW Golf GLS 1.8L 2001, for VW GTI 1.8L 2001-2006, for VW Jetta 1.8L 2001-2005, for Audi TT 1.8T 2001-2006, for 1.8T EA82 7.
●Fuel-efficient injector: High-efficiency fuel sprays and high-impedance coil enable quick start in cold environments, low fuel consumption, and good performance.
●Professional installation is highly recommended: Fuel injectors directly affect the air-to-fuel ratio of the engine and new fuel injectors require a new tuning or update. We also suggest you check the other engine component before installation.
●Package includes: 4 Pcs Fuel Injector; Material: Metal and Plastic; Number of Pins: 2; Voltage: DC 12V; Orifice Type: 4-Hole Disc; Flow Rate: Flow Rate at 43.5psi/3 bar, 28.7Lb/hr, 217G/min, 301.8cc/min.


Description

Description:
Made of metal and plastic, it is durable and can be used for a long time.
The high impedance fuel injector has been tested and exactly matches the internal resistance of the coil and the fuel flow of the OEM fuel injector.
It is a non-OEM product, accessory only!

Specification:
O-Rings included: Yes, pre-installed
Orifice Type: 4 Hole Disc
Voltage: DC 12 V.
Material: Metal, Plastic
Colour: black.
OE Number: 0280156061, 06A906031BA, 852-12184, FJ889
Pin Number: 2
Flow rate: Flow rate at 43.5psi/3 bar, 28.7Lb/hr, 217G/min, 301.8cc/min
Dimensions: 62 x 31 x 20 mm/2.44 x 1.22 x 0.79 inches (L x W x H).
Fit:
For VW Beetle 1.8L 2001-2005
For VW Golf GLS 1.8L 2001
For VW GTI 1.8L 2001-2006
For VW Jetta 1.8L 2001-2005
For Audi TT 1.8T 2001-2006
For 1.8T EA827

Note:
This installation must be done by an experienced mechanic who has access to a factory service manual and all the necessary tools!
Package includes:
4 x fuel injectors.

Installation:
Step 1. Make sure the engine is cooled. Disconnect the battery.
Step 2. Remove the bolts and brackets from the fuel ramp.
Step 3. Disconnect the plug from each injector.
Step 4. Lift the fuel ramp and remove the injector from the fuel ramp.
Step 5. Push the new injector into the ramp. Fix the fuel ramp again and put the injectors in their respective holes.
Step 6. Bolt on the fuel rail. Reconnect the fuel line. Plug in the injector connectors. Reconnect the battery.
Step 7. Check twice for fuel leaks before and after starting the engine.