Feature(may vary by option.)
●Square Nose End Mill: Cutting diameter: 25mm / 0.98"; cutting flute length: 20mm / 0.79"; straight shank diameter: 20mm / 0.79"; overall length: 105mm / 4.13"; number of flutes: 4 flutes.
●Carbide Tip: Tungsten carbide tip has high hardness, high strength, wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
●Wide Applications: Suitable for cutting alloy steel, stainless steel, cast iron, carbon steel, aluminum, copper, plastic, etc.. For shallow groove machining, side milling and finishing.
●Features: Square end cut, 4-flute design. Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications.
●Tips: Use on CNC machining centers, milling machines, drilling machine, lathes and other high-speed CNC machine tools. The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed.
[25mm]
[20mm]
Description
Square Nose End Mill
Tungsten Carbide Tip
It has high hardness, high strength, wear resistance. With good milling and cutting performance.
Straight Flutes
Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts.
No Coatings
Features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications.
- Can run at higher speed than high-speed steel.
- The longer the length of the tool clamped by the chuck, the better.
Wide Applications
Suitable for cutting alloy steel, stainless steel, cast iron, carbon steel, aluminum, copper, plastic, etc.. For shallow groove machining, side milling and finishing.
Use on CNC machining centers, milling machines, drilling machine, lathes and other high-speed CNC machine tools.
