Description:
*1. Color: black
*2. Material: plastic
*3. Self-priming up to 2.7m
*4. Type: single-inlet
*5. Flow capacity: 1136 L/H
Precaution:
*1. For optimal start-up and extended service life, a small amount of lubricant should be added to the pump inlet prior to use, and flushed with water after each use.
*2. Ensure that the inlet hose is sealed and does not exceed 9ft in length.
*3. The operating temperature shall be between 5°C to 49°C.
*4. When pumping abrasives or liquids containing particles, the use of filters on the inlet allows for an appropriate extension of service life.
*5. It is recommended that the pump be installed at ground level to ensure safe use.
*6. Installation and start-up. Observe if there is some fluid in the inlet hose and it is sucked into the pump within 15-20 seconds. If not, check that the intake hose is properly installed. DO NOT idling. If the pump does not start, check whether the hose is kinked or clogged.
*7. The recommended speed is 1500-3500 rpm, with lift and flow positively correlated to the speed. *8. Do not run in reverse.
*9. Avoid operating the pump in water or placing the power cord in water, and keep all codes dry. Package Includes:
1x ZONADAH Drill Pump