Feature

●Perfect for creating a new lighting project or refurbishing an old table lamp.
●The included comprehensive Lamp Kit Accessory Selection contains all the common parts necessary to refurbish, or create a lamp with either a ceramic/glass or drilled wooden base.
●Extra components are provided to ensure maximum compatibility with existing parts.
●To ensure electrical regulations are met two types of strain relief are provided
●All electrical work should be undertaken by persons competent in the wiring and installation of these items. If in any doubt, please consult a qualified electrician.


Description

Product description

Perfect for creating a new lighting project or refurbishing an old table lamp.

EACH LAMP KIT COMPRISES:

B22 Safety Switch Lamp Kit - Twisted Flex

• Half inch entry, brass B22 safety switch lamp holder with shade ring (switch will not operate if bulb removed)
• 2.5m gold coloured, 3 core, twisted braided lighting flex 0.75mm
• Transparent 13A plug with 3A fuse

LAMP KIT ACCESSORY SELECTION

The included, comprehensive Lamp Kit Accessory Selection contains all the common parts necessary to refurbish, or create a lamp with either a ceramic/glass or drilled wooden base.

• Half inch threaded tube, 38mm length
• Half inch grip washer
• Half inch back nut
• Half Inch brass wood nipple

To ensure maximum compatibility with items requiring a smaller entry:

• Half inch to 10mm brass reducer
• 10mm threaded tube, 20mm length
• 10mm grip washer
• 10mm back nut

PROTECTIVE COMPONENTS

• Nylon washer (fits underneath product)
• Fibre washer for ceramics and pottery (fit between lamp holder and thread)
• Flex/cable strain relief components (required for all flex installations to lamp holders)
• Black screw down flex clamp/collar with two screws for wood bases
• Black through-cable clamp for flex

All electrical work should be undertaken by persons competent in the wiring and installation of these items. If in any doubt, please consult a qualified electrician.

All metal electrical fittings must be earthed; all metal ElekTek products have earth terminals where required. When re-assembling Safety Switch Lamp Holder after wiring, please ensure Earth Strap on switch insert sits outside of the lamp holder body as originally supplied - do not squeeze inside the lamp holder body.

Legal Disclaimer

All electrical work should be undertaken by persons competent in the wiring and installation of these items. If in any doubt, please consult a qualified electrician. All metal electrical fittings must be earthed; all metal ElekTek products have earth terminals where required.