Instruction: 1: Printout the picture according to the photo parameters;the mirror side is the printing surface. 2: Dry the ink by nature or by hair drier. 3: Spray the gloss oil on the pattern surface uniformly (transparent auto spray paint,sold in paint shop). 4: Dry the gloss oil by nature or by hair drier. 5: Cut it along the periphery by 1mm from the pattern. 6: Soak it in water for about 30~60 seconds,then slide the coating and paper adequately by nature. 7: Spread the bass paper slowly to make the transfer printing coating stick to the product surface. 8: Damp and soft the alabaster paper,discharge the bubble and water in the film sufficiently,and then dry the surface by absorbent paper. 9: Bake it in the oven for 10~15 minutes at the temperature of 100~110℃,or dry it by nature for 1~3 days. Please notice:please do the transfer within 10 hours after you print and spray,don’t leave it over 12 hours,or it maybe can’t release!thanks