Feature(may vary by option.)


[Basic GOLD]




[Profi Gold]





Description

Satellite Find Satellite Finder Antennas Cable TV System Bowl Fuba HB-Digital Satellite Find Satellite Finder Antennas Cable TV System Bowl Fuba HB-Digital

HB-Digital Sat Finder for setting your digital or analogue satellite system. This digital satellite finder is microprocessor-controlled and therefore reliable and precise. The signal strength is displayed graphically on an LCD display in the form of a thermometer scale and in numbers (0-99). In addition, the device can emit high tones via a buzzer (the higher the sound, the better the signal). The SAT-FINDER is very sensitive and can detect even the weakest signal. Strong input signals (through powerful satellites, large satellite dish) can be easily attenuated for better reading.

High-quality refined SAT connectors ensure clean and excellent signal transmission as well as unique corrosion protection.

The satellite finder is simply switched between LNB and receiver via connection cable.

Box contents:

1 x satellite finder with gold-plated connectors

1 x user manual

1 x F connection cable (short)

HB-DIGITAL SATFINDERHB-DIGITAL SATFINDER

Technical data:

Input frequency: 950-2150 MHz input level min. : -40dBm input level max. : -10dBm Input impedance: 75 Ohm, F-Connector Operating Range: 52~60dB Power supply: DC 13-18 V

Packaging:Packaging:

Special features:

Built-in compass LCD screen LED backlight digital display very easy to use. Box contents: Use a 5dB attenuator when operating an LNB with a gain of 60~65 dB.

ConnectionsConnections

Quick start guide

Connect the LNB cable to the "satellite" marked connector of the SAT finder. Connect the cable from the receiver to the connector marked "Receiver". Select the transmitter or transponder whose signal quality you want to improve. Turn the knob on the right side until the display is approx. 50% of signal strength. If this is not adjustable, use the buttons "< ATT" or "ATT >" to lower or higher the attenuation of the signal. For LNBs with a gain of over 60 dB, use additional attenuators. Turn the satellite dish slowly until the signal strength increases. Then reduce the signal strength again to approx. 50% (with the rotary knob). Repeat the process until the signal strength no longer increases.

Looking for specific info?