[REGULAR]
[LIGHT]
[CLASSIC]
ROTARY VALVE TENOR HORN LUBRICANT OIL 60ML BY STEINER MUSIC We dont believe that a single oil can meet every requirement. Please choose the oil to suit your instrument components. Our REGULAR oil is designed for medium or average fitting valves, our CLASSIC oil is for those valves which have a greater tolerance or are looser Our LIGHT oil is for those valves which are of a very close or tight fit Advice: Lubricating Rotary Valve Instruments Do bear in mind that it will not just be enough to oil the valve rotor on your instrument. A higher viscosity Bearing and Linkage Oil should be applied to the bearings at the top and bottom of the rotor spindle, under the valve caps. This oil is also suitable for mechanical actions/linkages. Tuning Slide Grease or Tuning Slide Oil should be applied to clean slide legs. Where the instrument has ball-joint linkages then a higher viscosity Ball Joint Oil will be more effective than Bearing Oil. Steiner Music produces each of these required lubricants with most of them in various grades according to valve condition. Please see separate listings. Steiner’s large and comprehensive lubricant range provides Musicians with meticulously manufactured products designed at specific calibrated viscosities appropriate to the widest range of individual instrument requirements. They have been specially developed to provide good lubricity and high film strength, as well as low evaporation, and resistance to emulsion formation. Steiner Music manufactures the largest range of specialist musical instrument lubricants in the United Kingdom. The needs of Musicians in relation to the functioning of their instruments have been set alongside the skills of Tribologists and Oil Analysis Technicians to produce the high-grade products now in demand worldwide. (Note: All Steiner Music bottle products comply with the requirements of ECHA CLP in relation to liquid contents, packaging and labelling.)