Specification:
Condition: New
Material: PVC
Optional Size:
61 x 30cm
61 x 41cm
76 x 30cm
76 x 46cm
91 x 41cm
91 x 50cm
122 x 46cm
122 x 50cm
122 x 61cm
Package Included:
1 X Sea World Poster
Adhesive Method:
1. Wipe the glass surface on the back of the fish tank, add some detergent with water (to reduce the viscosity of the glue) and spray it on the glass surface.
No need to spray a lot, just a little damp or wipe with a damp cloth
2. Tear off a corner of the background protective film, align the fixed position and start pasting, apply slowly and evenly when pasting, if it appears when pasting
Air bubbles, you can tear the bubble and spray water to stick again. Scratch it in order and dont miss it. The missing area is easy to lather.
The phenomenon (4) will not appear if the bubbles are scraped off.
3. After pasting it, use a scraper or a blow to check whether there are bubble leaks. If there are bubbles, you can use a needle to pierce the bubbles and use the scraper to squeeze them out.
4. After the paste is finished, the glue will turn white if the water is not wiped off, open it and dry it with a hair dryer, and continue to paste and flatten it.
Note:
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures.