Feature

●U.S. Solid Solenoid Valve, Industrial Grade Products
●Valve body: Brass, Thread size: G 1/2" female inside, Orifice: 12 mm, AC 230 V, Type: Normally closed "NC".
●Oil seal material: Viton; Protection class: IP65; Medium:Water, Air, Gas, Oil, Diesel, Kerosine
●Installation is easy to use, this solenoid valve can be mounted vertically or horizontally, any angel you like. The arrow indicates the direction of the flow.
●Cannot be used in strong acids, strong bases, wastewater, industrial gases and other media containing many impurities.


Description

U.S. Normally Closed Solid Electric Solid (N/C) is constructed with a durable brass body, 1/2" (G) female threaded connections and a strong VITON seal.

Suitable for outdoor use; do not use underwater. Suitable for use with hot or cold water, natural gas, air, very low viscosity fluids (<20 cst) and gasoline or other petroleum based liquids. Customers chose this general purpose valve for additional gas tanks, sprinkler systems, etc.

Brand: US Solid

Model: USS2-00095

Size: 1/2"

Flow Aperture: 12mm

Body Material: Brass

Seal/membrane/gasket: Viton.

Rated voltage: 220V AC, ±10%

Current: 0.056A

Rated power: 12.5 VA

Operation Type: Driver

Operation mode: normally closed

Operating pressure range: 0.1-16 Bar (0 to 232 PSI)

Flow capacity: 4.8 gallons per minute (GPM) of water at 60 oF with a pressure drop of 1 PSI

Flow value: 4.8 HP

Minimum operating temperature: 1 4 degrees Fahrenheit (-10 degrees Celsius)

Maximum operating temperature: 248 degrees Fahrenheit (120 degrees Celsius)

Suitable media: air, water, oil, natural gas, diesel fuel, kerosene, etc.

OVERHEATING WARNING: Not designed for continuous operation (not a 100% duty cycle). When powered on, under normal operating conditions, the solenoid valve will become HOT. The coil will reach a maximum temperature of about 80°C. It fully complies with the national standard: JB/T7352-2010. If it is continuously powered for more than 8 hours, the coil may burn.