Specifications:
2: Trigger source: Active-high (3.0V-24V), with optocoupler isolation, can improve the anti-jamming ability of the system (customers can also short circuit common ground).
Output capacity: 5V - 36V DC, 15A continuous current at room temperature, power 400W (maximum current up to 30A under auxiliary cooling conditions)
Lifetime: infinite time change
Operating Temperature: -40~85℃
Weight: approx. 16 g.
Operating mode:
P1: trigger signal, the relay is on the time "OP", then disconnect; in the time "OP", as follows:
P1.1: signal is triggered again, invalid
P1.2: the signal is triggered again, the clock is reset
P1.3: Report the trigger again, release the relay, stop the clock;
P-2: trigger signal, the relay turns off "CL", the relay turned on "OP", and then disconnect the relay;
P3.1: trigger signal, the relay is activated after the "OP" delay, the delay to deactivate the relay "CL", then the operating cycle, if the period of the trigger signal, the relay off, stop the clock; the number of cycles ("LOP") can be set.
P3.2: without a trip signal, the relay is at the "OP" time, in the "CL" state, it is cycling; the frequency cycle ("LOP") can be adjusted;
P-4: signal hold function. If a trigger signal is erased, the relay remains activated; when the signal disappears, after the delay "OP", the relay is; if another signal is programmed, the synchronization is cleared.
Package contents:
1 × Pulse Signal Cycle Delay Timer Switch