EMUK has been a renowned supplier and partner of the caravan and automotive industries for more than 25 years. We meet your demands for cost-effective solutions and make sure your parts and components arrive where they are needed safely, reliably and on time. Close collaboration between EMUK, our cooperation partner and our customers results in first-rate, application-specific solutions - always with one aim: to make sure you are satisfied. Are mirror widenings obligation?. The necessity for the mirror widenings results from paragraph 56 the StVZO (Motor Vehicles Regulations), in which it means among other things: „Motor vehicles must have mirrors, which are so constituted the fact that after the driver backwards and sideways - also with would ride along from supporters - it can observe all traffic procedures substantial for it. Since the caravan mirror is clearly broader in all rule than the towing vehicle, dead angles so called are absolutely unavoidable by the standard outside mirrors. In addition paragraph 9 of road traffic regulations demands that when turning, bending and backing up an endangerment of other road users is to be excluded. Only in two cases auxiliary mirrors can be dispensable: 1. If a narrow caravan the towing vehicle laterally not towered above (thus the passenger cars outside mirrors not obstructed) and 2nd if you as a driver the road over a folding caravan away in the inside mirror to observe can. To rigid of caravan that does not apply normally, because even if inside mirrors and caravan windows are on same height, usually only one view gap is ordered on the rear road scene. Thus dead angles remain. A mounting bracket (cast aluminium part) adapted to the specific vehicle mirror ensures a perfect fit without vibration. Assembly is quick and easy, and requires no tools. All parts are made of corrosion-resistant materials. It comes with a left and a right bracket, 2 mirror heads and mounting instructions.