Specification: Item Type: Beer Keg Pump Kit Material: Brass+Stainless Steel Thread: G5/8 Weight: Approx. 2601g / 91.7oz Product Description: This product is a combination of an inflator and a tap, a wine tube, and a dispenser. It can be directly installed on the stainless steel draft beer barrel, and then it can be pressurized and pumped. The gas will pressurize the wine and open it. You can drink delicious drinks with the tap. You can also use this product to directly connect with carbon dioxide to pressurize the wine, and combine it at will, which is convenient and practical. Convenient to carry, it is a very good tool for outings to replenish beer barrels, and it can temporarily increase the pressure of beer to make beer. Package List: 1 x Beer Keg Pump 1 x Beer Dispenser 1 x Beer Tap 1 x Tap Handle 6 x Accessory Note: 1. Each keg Tap ‑ 8in pump has pressure tested, the hose clip on the pipe is assembled by us instead of being used by others. When changing hose clamps make sure they are clamped and not deflated.2. It is necessary to have lubricating oil in the air pump. Make sure it is food grade lubricating oil. Of course you can put on your own oil.3. The pump body is cylindrical. It is recommended to clean and put away after each use. Avoid knock against. The hollows of cylindrical wall will make the pumping less pleasant.4. After used per time, be sure to clean your party pump with chemicals specifically manufactured for beer line cleaning. The simple process takes only a few minutes and will assure trouble free operation when the party pump will next be used.