Notes:
2. There is on/off button at back side of the solar panel, please keep it at "ON" mode to get charged.
3. Please remove the clear film on the front of solar panel to get it charged well.
4. Please do not immerse the solar panel into water, IP 65 is designed for natural rainfall.
5. Panel must be in dark/dim environment to turn on the lights.
6. When you want to charge the battery, please make sure its on status, then it will be charged automatically.
7. The battery is non-replaceable. Do not attempt to replace it. The lights bulb is constructed with non-replaceable. Do not attempt to replace any bulb.
8.If the ground is too hard, do not twist or hammer it with force. Try to soften the ground with water and then insert into the ground. Failure to follow this may result in product damage.
9.Make sure the switch of the lights is turned to "ON" status; if not, the battery will not be charged.
10.It is suggested the solar panel to be fully charged for 6-8h at the first use.
11. All the Christmas string lights are well coiled with bobbin winder to avoid a mess. When you install them, do not uncoil all the copper lights at once, uncoil a bit and install them and then go on.